Our Colour Range at Pro Windows & Doors
Browse through our extensive colour range to find the perfect finish for your project.
Click on the window icon to view the coloured frame.
Our standard colour range consisting of our most popular solid colours.
Appliance White Matt
RGB:
Arctic White Matt
RGB:
Off White Matt
RGB:
Titania Matt
RGB:
Canvas Cloth Matt
RGB:
Bronco Matt
RGB:
Scoria Matt
RGB:
Pioneer Red Matt
RGB:
Ghost Grey Matt
RGB:
Gull Grey Matt
RGB:
Sandstone Grey Matt
RGB:
Grey Friars Matt
RGB:
Charcoal Matt
RGB:
Gravel Matt
RGB:
FlaxPod Matt
RGB:
Black Matt
RGB:
New Denim Blue Matt
RGB:
Slate Blue Matt
RGB:
Lichen Matt
RGB:
Mist Green Matt
RGB:
Karaka Matt
RGB:
Ironsand Matt
RGB:
Lignite Matt
RGB:
Anotec Mid Bronze Matt
RGB:
Our standard colour range consisting of our most popular pearlescent colours.
Warm White Pearl Kinetic® Matt
RGB:
Metro Silver Pearl Kinetic® Matt
RGB:
Palladium Silver Matt
RGB:
Metro Electric Cow Kinetic® Matt
RGB:
Metro Coal Dust Kinetic® Matt
RGB:
Window Bronze Kinetic® Matt
RGB:
Our standard colour range consisting of our most popular solid colours.
Appliance White Flat
RGB:
Arctic White Flat
RGB:
Titania Flat
RGB:
Metro Silver Pearl Flat
RGB:
Sandstone Grey Flat
RGB:
Charcoal Flat
RGB:
FlaxPod Flat
RGB:
Black Flat
RGB:
Ironsand Flat
RGB:
*Warranties are only valid when applied by a Dulux Accredited or Dulux Prime Accredited Powder Coater to the warranty specification on recommended projects, and subject to specified warranty terms and conditions.
Visit duluxpowders.co.nz/information/alumi-shield-warranty/ to learn more.
Visit duluxpowders.co.nz/products/duralloy-plus/ to learn more about Duralloy® +PLUS and duluxpowders.co.nz/products/protexture/ to learn more about Protexture®.
The Duralloy® +PLUS Range features popular solid and pearlescent finishes, delivered with warranty-grade* advanced, highly durable polyester thermosetting powder.
Duralloy® +PLUS is ideal for:
The Protexture® Range features popular, highly mar- and scuff-resistant textured finishes, designed for protection and backed by warranty-grade* advanced, highly durable polyester thermosetting powder.
Protexture® is ideal for:
Duralloy® +PLUS and Protexture® are suitable for projects >10m from the high tide mark where pH is between 5 and 9. Please refer to duluxpowders.co.nz/specmap for warranty implications in such environments.
Please note that these colours may not be an exact representation of the final product. We recommend confirming your choice by seeing a physical colour swatch by visiting local OMEGA Fabricator.
Information on this website should be taken as general advice only. Careful consideration must be taken when choosing the powder coat product based on your projects environment and surroundings. Visit duluxpowders.co.nz/specmap/ for more information based on site specific variables for your project. Contact your local OMEGA fabricator to assist with any further questions.
We proudly offer Dulux AlumiShield™ warranties, providing 15 years of protection on both Protexture and Duralloy +Plus coatings. These industry-leading warranties ensure long-lasting film integrity and colour performance, giving you confidence that your aluminium powder coating will stand up to New Zealand’s Climatic conditions.
AlumiShield™ Warranties | Dulux SpecMap
As a Prime Accredited Powder Coater, we apply Dulux powder coatings to the highest industry standards. This accreditation ensures you receive exceptional quality and durability, backed by the full AlumiShield™ warranty.
Care and maintenance schedules are essential to ensure that the life of your powder coat is maximised whether the project is residential, commercial, or non-habitable.
Simply follow three important steps:
1. Carefully remove any loose surface deposits with a wet sponge by gently rubbing.
2. Clean the surface with a soft brush (non-abrasive) and diluted solution of a mild detergent – a pH neutral liquid handwash or dishwashing liquid is ideal.
3. After cleaning, rinse well with fresh water. Water blasters or high pressure washers should not be used.
For oily deposits, use either Isopropyl alcohol (IPA), methylated spirits or Selleys Powder Coating Cleaning Wipes. After using any of these products, go back and repeat steps 2 and 3. Where possible, and if available, it is recommended that hard water be avoided 1.
1. Hard water has a higher dissolved mineral content.
2. For information on care and maintenance schedules, visit duluxpowders.co.nz/tech-advice/ to download the latest Care and Maintenance Tech Advice.
Protect all powder coated joinery
When building, renovating, plastering, or painting around powder coated surfaces use approved tapes and films in accordance with the manufacturer’s instruction.
Remove unwanted paint & sealants
Ensure all paint splatters or excess sealant are removed immediately.
Use recommended solvents for oily/stubborn stains only
Use only Isopropyl alcohol (IPA) or methylated spirits.
Following this, clean with a pH neutral detergent and rinse off with clean fresh water.
Regularly inspect
Inspect your powder coating often and clean more regularly if required.
Clean in mild conditions
Clean powder coated surfaces only when the surface temperatures are below 25°C.
Use aggressive solvents
Do not use turpentine, white spirits, thinners, citrus based cleaners or other aggressive solvents on powder coating.
Non approved solvents such as these can cause damage that may not be visible immediately and may take up to twelve months to appear.
Rub powder coated surfaces excessively
Do not rub powder coated surfaces excessively, especially metallic finishes.
Allow sunscreen to come into contact with coated surfaces
Many sunscreens adversely affect powder coated finishes.
If sunscreen contacts powder coated joinery, clean off with Isopropyl alcohol (IPA), methylated spirits or Selleys
Powder Coating Cleaning Wipes as per instruction above.
Neglect recommended care and maintenance schedules2
To comply with Dulux Alumi Shield™ powder coating warranties the recommended care and maintenance schedules must be adhered to.
